TRIBLENDER DISSOLVER WITH TABLE
The CM3 Engineering triblender dissolver CM3 is used to mix solid or liquid products quickly and efficiently, and is designed to work independently as well.
The table top at an ideal height, allows bags to be easily supported and facilitates their discharge into the hopper. The hopper is constructed by plate lathe from flat sheet metal, and has no unnecessary welding for higher quality.
Principle of operation:
The products to be dissolved are fed into the hopper. The strong vacuum at the base of the hopper allows the impeller to literally suck in the product to be dissolved, while the liquid is pumped out as in a normal centrifugal pump. The moment the hopper valve opens, the solids are sucked in and dissolve perfectly as they pass inside the pump housing. The system goes into mixing just before the suction inlet of the centrifugal pump. A simple, inexpensive and very effective and reliable system for rapid and uniform mixing.
The unique sanitary design of the Triblender CM3 Engineering allows for easy adaptation to a variety of mixing applications in food, beverage, dairy, cosmetic, chemical and pharmaceutical applications.
The parts in contact with the product are all made of AISI 316-L stainless steel, and all elastomers of EPDM, with open No. 6-blade impeller that allows, during washing, to perfectly clean and sanitize the pump body inside the volute.
By removing the hopper at the end of production, before the washing and sanitizing cycle, and connecting the washing system implemented in the Triblender delivery pipe, the sanitary butterfly valve and venturi system can be efficiently and completely washed via built-in washing ball.
It is recommended to work in recirculation until all solids have been incorporated, and also to have the most homogeneous dissolution possible, continuing to recirculate for a period even after the solids have already dissolved completely.
TECHNICAL SPECIFICATIONS:
Motor: 4.0KW- 5.5KW- 7.5KW 2900 rpm IE3
Suction: Clamp 2″ DN65.
Discharge: Clamp 1″1/2 DN50.
Liquid flow rate: up to 50,000 liters/hour.
Solids suction: up to 3500 kg/hour (with sugar).
Hopper capacity: 50 liters.
Hopper inclination: 60°.
Electric panel with motor protector, emergency and run button.
MATERIALS:
Materials in contact with the product: AISI 316-L.
Mechanical seal: TUC/CARB SPEC/EPDM.
Seals: EPDM.
APPLICATIONS:
Preparation of sugar syrups, sorbitol, glucose, lactose and derivatives.
Dissolution of milk powder.
Dissolution of cocoa and/or sugar in milk.
Dissolution of whey powder.
Preparation of dairy flours and starches.
Preparation of brines.
Pre-mixing of yogurt and other milk-based desserts.
Dissolutions of casein and caseinates in the dairy industry.
Preparation of pesticides and fertilizers.
OPTIONS:
Double mechanical seal flowed externally to the pump body.
Clamp, DIN or SMS connections. Drainage.
Protection net inside the hopper. Vibrator in the hopper.
Valves with pneumatic actuator. Minimum and maximum level probes.
Table on swivel wheels or on adjustable feet. Mechanical seal with different face material based on the product to be processed.
Frequency inverter for the electric motor.
Stainless steel electrical panel with specifications dictated by the customer.
Looking for a customised solution?
We have it!
CM3 Engineering is committed to providing customised solutions that fully meet the needs
of customers